Aluminum die castings have low density, high specific strength and good plasticity and machinability. Some grades can be further improved in mechanical properties, corrosion resistance and machinability by quenching and tempering, which makes them suitable for die casting production.
However, aluminum alloy structures are prone to porosity and a high gas content. If other metal inclusions and impurities are present, casting defects such as shrinkage porosity, shrinkage cavities and gas holes easily occur. So what should be done about them?
If the defect is inside the finished part, impregnation can be used. Also called impregnating, dipping or penetration sealing, it lets the sealant enter the pores by natural penetration, vacuum or pressure, and after curing blocks the micro-pores to seal leaks and densify the part.
Impregnation falls into two main types:
Local impregnation:Painting, injection, dip coating and local pressure impregnation, suitable for aluminum die castings with known defect locations.
Overall impregnation:Hot steam impregnation, pressure impregnation, vacuum impregnation and vacuum-pressure impregnation, suitable for batch processing of small and medium castings.
But impregnation is not a cure-all. Good parts are made, not repaired.
Zhende Aluminum has nearly 20 years of experience in aluminum alloy die casting, supports customized requirements and welcomes factory audits.

